FPGA Install: Unterschied zwischen den Versionen
Schomi (Diskussion | Beiträge) |
Schomi (Diskussion | Beiträge) |
||
| Zeile 19: | Zeile 19: | ||
==='''USB Memory Stick'''=== | ==='''USB Memory Stick'''=== | ||
| − | *Download the Firmware | + | *Download the Firmware |
*Transfer the download file to the USB Stick | *Transfer the download file to the USB Stick | ||
*Plug-in the USB stick and mount it via device manager. a GUI restart is required if you don't have VTI image | *Plug-in the USB stick and mount it via device manager. a GUI restart is required if you don't have VTI image | ||
Version vom 1. September 2012, 11:36 Uhr
 - FPGA Installation
|
 - FPGA Install
|
FPGA Upgrade
From time to time we need an FPGA Upgrade.
to install it there are two ways:
USB Memory Stick
- Download the Firmware
- Transfer the download file to the USB Stick
- Plug-in the USB stick and mount it via device manager. a GUI restart is required if you don't have VTI image
- Run the FPGA Upgrade Plugin .
- Select the file from the USB stick and run the upgrade (this may take a few minutes)
- Restart the box
Online via Internet
- Run the FPGA Upgrade Plugin.
- Download the firmware file (press blue button)
- Select the downloaded file and run the upgrade (this may take a few minutes)
- Restart the box
Back to Home
