Smargo Smartreader

Hersteller sind Maxdigital und Aglois.Der Smargo SmartreaderPlus ist ein USB Kartenleser und Programmierer basierend auf einem starken ATMEL ARM 91 Prozessor. Der SmartReaderPlus beinhaltet ein integriertes USB zu Seriell Konverter.
Der SmartReaderPlus funktioniert dadurch mit allen gängigen Phoenix kompatiblen Linux und Windows Applikationen.

Technische Daten:

• Powerfull ARM 91 Thumb Processor
• High-performance 32-bit RISC Architecture
• High-density 16-bitInstruction Set
• 64 Kbytes, organized in 512Pages of 128 Bytes (Single Plane)
• 16 Kbytes Internal High-speed SRAM, Single-cycle Access at Maximum Speed
• Low-power RC Oscillator, 3 to20 MHz On-chip Oscillator and one PLL
• Supports 3.20, 3.43, 3.69,4.00, 4.36, 4.80, 5.34, 6.00, 6.86, 8.00, 9.61, 12.0
• and 16.0 MHz for smartcards (T=0 and T=1)
• No switches on programmer to select the desired mode, automatic frequency controll
• 5V smartcard support
• Frequency/Baudrate autocalculation and Frequency Generator
• Developer guide available.
• Works on all Dreambox Models with USB connection, also on 6 MHz with Dreambox 7025.
• Can be cascaded with more SmartReaders (>100) in 1 system using an USB Hub
• Fullspeed USB1.1/ USB2.0
• Com Port via USB
• No power supply or cables required
• True ISO7816
• Upgradable firmware
• Windows driver available
• The Full speed USB communication ensures fast and correct data transfer to the card
• Compatible with PCI-DVB or USB-DVB devices