|
|
| (7 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) |
| Zeile 1: |
Zeile 1: |
| − | To equip your Vu + box with a different, or new image, you need what we call it "Image". There are 2 versions of images ,the USB one, and serial flash (NFI).
| + | #WEITERLEITUNG [[VTi Install]] |
| − | | |
| − | == How to upgrade the Vu+ Solo SE V1/V2 image via USB ==
| |
| − | | |
| − | *Save the image on the PC (USB version)
| |
| − | *Unzip files
| |
| − | *Format USB flash drive with the file system FAT, or FAT32
| |
| − | *Create on the stick the Directory /vuplus/solose
| |
| − | *Copy to the stick the 3 files into the Directory /vuplus/solose
| |
| − | *Power off VU+ STB
| |
| − | *Remove all USB devices from the box
| |
| − | *Plug-in the USB Stick into Vu+ Box
| |
| − | *Turn on the VU+ STB
| |
| − | *Firmware Update will start automatically
| |
| − | *During the flash procedure the LED pulsates
| |
| − | *If the LED blinks, the flashing process is finished, then you can unplug the USB stick from the box
| |
| − | *Power off the VU+ STB , and restart it again
| |
| − | | |
| − | | |
| − | == How to upgrade the Vu+ Duo2 image via USB ==
| |
| − | | |
| − | *Save the image on the PC (USB version)
| |
| − | *Unzip files
| |
| − | *Format USB flash drive with the file system FAT, or FAT32
| |
| − | *Create on the stick Directory /vuplus/duo2
| |
| − | *Copy to the stick the 5 files into Directory /vuplus/duo2
| |
| − | *Power off VU+ STB
| |
| − | *Remove all USB devices from the box
| |
| − | *Plug-in the USB Stick into Vu+ Box
| |
| − | *Turn on the VU+ STB
| |
| − | *Press the button on the front to start the flash procedure
| |
| − | *Wait for "Finished, Removing USB" message
| |
| − | *Unplug the USB Stick from the box
| |
| − | *Power off the VU+ STB , and restart it again
| |
| − | | |
| − | | |
| − | == How to upgrade the Vu+ Solo2 image via USB ==
| |
| − | | |
| − | *Save the image on the PC (USB version)
| |
| − | *Unzip files
| |
| − | *Format USB flash drive with the file system FAT, or FAT32
| |
| − | *Create on the stick Directory /vuplus/solo2
| |
| − | *Copy to the stick the 5 files into Directory /vuplus/solo2
| |
| − | *Power off VU+ STB
| |
| − | *Remove all USB devices from the box
| |
| − | *Plug-in the USB Stick into Vu+ Box
| |
| − | *Turn on the VU+ STB
| |
| − | *wait for "Update please press Power"
| |
| − | *Tip on the blue Power button at the front to start the flash procedure
| |
| − | *Wait for "Finished, Removing USB" message
| |
| − | *Unplug the USB Stick from the box
| |
| − | *Power off the VU+ STB , and restart it again
| |
| − | | |
| − | | |
| − | == How to upgrade the Vu+ Ultimo image via USB ==
| |
| − | | |
| − | *Save the image on the PC (USB version)
| |
| − | *Unzip files
| |
| − | *Format USB flash drive with the file system FAT,or FAT32
| |
| − | *Create on the stick : Directory/vuplus/ultimo
| |
| − | *Copy to the stick the 4 files into :Directory/vuplus/ultimo
| |
| − | *Power off VU+ STB
| |
| − | *Remove all USB devices from the box
| |
| − | *Plug-in the USB Stick into Vu+ Box
| |
| − | *Turn on the VU+ STB
| |
| − | *Press the button "-" on front of the Ultimo
| |
| − | *Wait for "Finished, Removing USB" message
| |
| − | *Unplug the USB Stick from the box
| |
| − | *Power off the VU+ STB , and restart it again
| |
| − | | |
| − | | |
| − | | |
| − | == How to upgrade the Vu+ Uno image via USB ==
| |
| − | | |
| − | *Save the image on the PC (USB version)
| |
| − | *Unzip files
| |
| − | *Format USB flash drive with the file system FAT,or FAT32
| |
| − | *Create on the stick : Directory/vuplus/uno
| |
| − | *Copy to the stick the 4 files into :Directory/vuplus/uno
| |
| − | *Power off VU+ STB
| |
| − | *Remove all USB devices from the box
| |
| − | *Plug-in the USB Stick into Vu+ Box
| |
| − | *Turn on the VU+ STB
| |
| − | *Press the button "-" on front of the Uno
| |
| − | *Wait for "Finished, Removing USB" message
| |
| − | *Unplug the USB Stick from the box
| |
| − | *Power off the VU+ STB , and restart it again
| |
| − | | |
| − | | |
| − | | |
| − | == How to upgrade the Vu+ Duo / Vu+ Duo LE image via USB ==
| |
| − | | |
| − | *Save the image on the PC (USB version)
| |
| − | *Unzip files
| |
| − | *Format USB flash drive with the file system FAT,or FAT32
| |
| − | *Create on the stick : Directory/vuplus/duo
| |
| − | *Copy to the stick the 3 files into :Directory/vuplus/duo
| |
| − | *Power off VU+ STB
| |
| − | *Remove all USB devices from the box
| |
| − | *Plug-in the USB Stick into Vu+ Box
| |
| − | *Turn on the VU+ STB
| |
| − | *Firmware Update will start automatically
| |
| − | *Wait for the VFD to display "Finished ... please reboot"
| |
| − | *Unplug the USB Stick from the box
| |
| − | *Power off the VU+ STB , and restart it again
| |
| − | | |
| − | | |
| − | | |
| − | == How to upgrade the Vu+ Solo image via USB ==
| |
| − | | |
| − | *Save the image on the PC (USB version)
| |
| − | *Unzip files
| |
| − | *Format USB flash drive with the file system FAT,or FAT32
| |
| − | *Create on the stick : Directory/vuplus/duo
| |
| − | *Copy to the stick the 3 files into :Directory/vuplus/duo
| |
| − | *Power off VU+ STB
| |
| − | *Remove all USB devices from the box
| |
| − | *Plug-in the USB Stick into Vu+ Box
| |
| − | *Turn on the VU+ STB
| |
| − | *Firmware Update will start automatically
| |
| − | *The Standby LED will be red and if the USB stick detected ,the LEDs lights up
| |
| − | *If the Standby LED is green, the flashing process is finished, then you can unplug the USB stick from the box
| |
| − | *Power off the VU+ STB , and restart it again
| |
| − | | |
| − | == How to upgrade the Vu+ image via Serial Port ==
| |
| − | | |
| − | Sometimes it comes that the box only respond via serial port.Then we need the *. Nfi file and the Vu + Util.
| |
| − | <br> The '''Vu+ Util''' for serial flash , you can get it from here [http://www.vuplus-support.org/wbb2/database.php?action=ddcount&data_url=8754_vu-util_v2.0.1.zip&data_id=1047&ordner=65&selector= vuplus-support.org Forum]
| |
| − | | |
| − | *Image saved on the PC (nfi version)
| |
| − | *Unzip files
| |
| − | *Start Vu+ Util
| |
| − | [[Datei:1vuduopdfadobereader.png|500px]]
| |
| − | | |
| − | *Select your COM port
| |
| − | [[Datei:2manualforvuutilpdfadob.png|500px]]
| |
| − | | |
| − | *Check the DHCP if you do not have any static IP for VU+
| |
| − | [[Datei:3vuplusdhcpon.jpg|500px]]
| |
| − | | |
| − | *Then click the Connect button
| |
| − | [[Datei:4manualforvuutilpdfadob.png|500px]]
| |
| − | | |
| − | *Now you should see “Serial port open success. Please turn on your box.”, then power on the VU+ and since DHCP is set, click Next button to set IP
| |
| − | [[Datei:5manualforvuutilpdfadob.png|500px]] | |
| − | | |
| − | *Now you see " IP Setup Success" in VU+ Util
| |
| − | [[Datei:6manualforvuutilpdfadob.png|500px]]
| |
| − | | |
| − | *Now browse the *. nfi File menu. We recommend, of course, the VTi Image
| |
| − | [[Datei:7manualforvuutilpdfadob.png|500px]]
| |
| − | | |
| − | *And then click the Flash button I VU+ Util you will see "Reading file,please wait a moment..."
| |
| − | [[Datei:8manualforvuutilpdfadob.png|500px]]
| |
| − | | |
| − | *then it will appear "flashing process is completed"
| |
| − | [[Datei:9manualforvuutilpdfadob.png|500px]]
| |
| − | | |
| − | *Now the update is finished. You can click "disconnect" to disconnect and then exit at Exit button, in the VU + Util.Power off the VU+ and then restart the box
| |
