VTi Install: Unterschied zwischen den Versionen

Aktuelle Version vom 12. April 2017, 21:59 Uhr

To equip your Vu + box with a different, or new image, you need what we call it "Image". There are 2 versions of images ,the USB one, and serial flash (NFI).

Main Faults: wrong Image downloaded e.g. Vu+ Duo instead of Vu+ Duo² wrong folder structure on USB stick USB stick wrong formated USB stick incompatibel or damaged

How to upgrade the Vu+ Solo4k image via USB

Save the image on the PC (USB version)
Unzip files
Format USB flash drive with the file system FAT, or FAT32
Create on the stick Directory /vuplus/solo4k
Copy to the stick the 5 files into Directory /vuplus/solo4k
Power off VU+ STB
Remove all USB devices from the box
Plug-in the USB Stick into Vu+ Box
Turn on the VU+ STB
Wait for "Update! Press Power"
Press the button on the front to start the flash procedure
Wait for "Finished, Removing USB" message
Unplug the USB Stick from the box
Power off the VU+ STB , and restart it again

How to upgrade the Vu+ Zero image via USB

Save the image on the PC (USB version)
Unzip files
Format USB flash drive with the file system FAT, or FAT32
Create on the stick the Directory /vuplus/zero
Copy to the stick the 5 files into the Directory /vuplus/zero
Power off VU+ STB
Remove all USB devices from the box
Plug-in the USB Stick into Vu+ Box
Turn on the VU+ STB
Firmware Update will start automatically
During the flash procedure the LED pulsates
If the LED blinks, the flashing process is finished, then you can unplug the USB stick from the box
Power off the VU+ STB , and restart it again

How to upgrade the Vu+ Solo SE V1/V2 image via USB

Save the image on the PC (USB version)
Unzip files
Format USB flash drive with the file system FAT, or FAT32
Create on the stick the Directory /vuplus/solose
Copy to the stick the 3 files into the Directory /vuplus/solose
Power off VU+ STB
Remove all USB devices from the box
Plug-in the USB Stick into Vu+ Box
Turn on the VU+ STB
Firmware Update will start automatically
During the flash procedure the LED pulsates
If the LED blinks, the flashing process is finished, then you can unplug the USB stick from the box
Power off the VU+ STB , and restart it again

How to upgrade the Vu+ Duo² image via USB

Save the image on the PC (USB version)
Unzip files
Format USB flash drive with the file system FAT, or FAT32
Create on the stick Directory /vuplus/duo2
Copy to the stick the 5 files into Directory /vuplus/duo2
Power off VU+ STB
Remove all USB devices from the box
Plug-in the USB Stick into Vu+ Box
Turn on the VU+ STB
Press the button on the front to start the flash procedure
Wait for "Finished, Removing USB" message
Unplug the USB Stick from the box
Power off the VU+ STB , and restart it again

How to upgrade the Vu+ Solo² image via USB

Save the image on the PC (USB version)
Unzip files
Format USB flash drive with the file system FAT, or FAT32
Create on the stick Directory /vuplus/solo2
Copy to the stick the 5 files into Directory /vuplus/solo2
Power off VU+ STB
Remove all USB devices from the box
Plug-in the USB Stick into Vu+ Box
Turn on the VU+ STB
wait for "Update please press Power"
Tip on the blue Power button at the front to start the flash procedure
Wait for "Finished, Removing USB" message
Unplug the USB Stick from the box
Power off the VU+ STB , and restart it again

How to upgrade the Vu+ Ultimo image via USB

Save the image on the PC (USB version)
Unzip files
Format USB flash drive with the file system FAT,or FAT32
Create on the stick : Directory/vuplus/ultimo
Copy to the stick the 4 files into :Directory/vuplus/ultimo
Power off VU+ STB
Remove all USB devices from the box
Plug-in the USB Stick into Vu+ Box
Turn on the VU+ STB
Press the button "-" on front of the Ultimo
Wait for "Finished, Removing USB" message
Unplug the USB Stick from the box
Power off the VU+ STB , and restart it again

How to upgrade the Vu+ Uno image via USB

Save the image on the PC (USB version)
Unzip files
Format USB flash drive with the file system FAT,or FAT32
Create on the stick : Directory/vuplus/uno
Copy to the stick the 4 files into :Directory/vuplus/uno
Power off VU+ STB
Remove all USB devices from the box
Plug-in the USB Stick into Vu+ Box
Turn on the VU+ STB
Press the button "-" on front of the Uno
Wait for "Finished, Removing USB" message
Unplug the USB Stick from the box
Power off the VU+ STB , and restart it again

How to upgrade the Vu+ Duo / Vu+ Duo LE image via USB

Save the image on the PC (USB version)
Unzip files
Format USB flash drive with the file system FAT,or FAT32
Create on the stick : Directory/vuplus/duo
Copy to the stick the 3 files into :Directory/vuplus/duo
Power off VU+ STB
Remove all USB devices from the box
Plug-in the USB Stick into Vu+ Box
Turn on the VU+ STB
Firmware Update will start automatically
Wait for the VFD to display "Finished ... please reboot"
Unplug the USB Stick from the box
Power off the VU+ STB , and restart it again

How to upgrade the Vu+ Solo image via USB

Save the image on the PC (USB version)
Unzip files
Format USB flash drive with the file system FAT,or FAT32
Create on the stick : Directory/vuplus/duo
Copy to the stick the 3 files into :Directory/vuplus/duo
Power off VU+ STB
Remove all USB devices from the box
Plug-in the USB Stick into Vu+ Box
Turn on the VU+ STB
Firmware Update will start automatically
The Standby LED will be red and if the USB stick detected ,the LEDs lights up
If the Standby LED is green, the flashing process is finished, then you can unplug the USB stick from the box
Power off the VU+ STB , and restart it again

How to upgrade the Vu+ Uno 4k image via USB

Save the image on the PC
Format USB flash drive with the file system FAT or FAT32
Extract the downloaded image on the flash drive, the folders on the drive should be vuplus/uno4k
There should be files in the uno4k folder
Turn the Vu+ off (in deepstandby or with the power switch)
Remove all USB devices
Insert the flash drive in the Vu+
Turn the Vu+ on
During the flash process the LED pulsates
When the flash progress is finished the LED stops pulsating and starts blinking
Remove the flash drive from the Vu+
Use the power switch to turn the Vu+ off and back on
The VTi startwizard should popup, otherwise something went wrong

How to upgrade the Vu+ image via Serial Port

Sometimes it comes that the box only respond via serial port.Then we need the *. Nfi file and the Vu + Util.
The Vu+ Util for serial flash , you can get it from here vuplus-support.org Forum

Image saved on the PC (nfi version)
Unzip files
Start Vu+ Util

Select your COM port

Check the DHCP if you do not have any static IP for VU+

Then click the Connect button

Now you should see “Serial port open success. Please turn on your box.”, then power on the VU+ and since DHCP is set, click Next button to set IP

Now you see " IP Setup Success" in VU+ Util

Now browse the *. nfi File menu. We recommend, of course, the VTi Image

And then click the Flash button I VU+ Util you will see "Reading file,please wait a moment..."

then it will appear "flashing process is completed"

Now the update is finished. You can click "disconnect" to disconnect and then exit at Exit button, in the VU + Util.Power off the VU+ and then restart the box

@@ Zeile 3: / Zeile 3: @@
 {|width="30%"
   |[[Bild:deutsch.png]] - [[VTi Installation]]
-  |[[Bild:english.png]] - [[VTI Install]]
+  |[[Bild:english.png]] - [[VTi Install]]
   |}
-[[VTi Install]]
+To equip your Vu + box with a different, or new image, you need what we call it "Image". There are 2 versions of images ,the USB one, and serial flash (NFI).
-To equip your Vu + box with a different, or new image, you need what we call it "Image". There are 2 versions of images ,the USB one, and serial flash (NFI).
+{| class="wikitable"
+|-
+| style="background-color:#FFCBCB; width: 35em;"|'''Main Faults:'''<br />
+* wrong Image downloaded e.g. Vu+ Duo instead of Vu+ Duo²
+* wrong folder structure on USB stick
+* USB stick wrong formated
+* USB stick incompatibel or damaged
+|}
@@ Zeile 64: / Zeile 71: @@
-== How to upgrade the Vu+ Duo2 image via USB ==
+== How to upgrade the Vu+ Duo² image via USB ==
 *Save the image on the PC (USB version)
@@ Zeile 81: / Zeile 88: @@
-== How to upgrade the Vu+ Solo2 image via USB ==
+== How to upgrade the Vu+ Solo² image via USB ==
 *Save the image on the PC (USB version)
@@ Zeile 114: / Zeile 121: @@
 *Unplug the USB Stick from the box
 *Power off the VU+ STB , and restart it again
@@ Zeile 132: / Zeile 138: @@
 *Unplug the USB Stick from the box
 *Power off the VU+ STB , and restart it again
@@ Zeile 150: / Zeile 155: @@
 *Unplug the USB Stick from the box
 *Power off the VU+ STB , and restart it again
@@ Zeile 168: / Zeile 172: @@
 *If the Standby LED is green, the flashing process is finished, then you can unplug the USB stick from the box
 *Power off the VU+ STB , and restart it again
+== How to upgrade the Vu+ Uno 4k image via USB ==
+*Save the image on the PC
+*Format USB flash drive with the file system FAT or FAT32
+*Extract the downloaded image on the flash drive, the folders on the drive should be vuplus/uno4k
+*There should be files in the uno4k folder
+*Turn the Vu+ off (in deepstandby or with the power switch)
+*Remove all USB devices
+*Insert the flash drive in the Vu+
+*Turn the Vu+ on
+*During the flash process the LED pulsates
+*When the flash progress is finished the LED stops pulsating and starts blinking
+*Remove the flash drive from the Vu+
+*Use the power switch to turn the Vu+ off and back on
+*The VTi startwizard should popup, otherwise something went wrong
 == How to upgrade the Vu+ image via Serial Port ==
 Sometimes it comes that the box only respond via serial port.Then we need the *. Nfi file and the Vu + Util.
-<br> The '''Vu+ Util''' for serial flash , you can get it from here [http://www.vuplus-support.org/wbb2/database.php?action=ddcount&data_url=8754_vu-util_v2.0.1.zip&data_id=1047&ordner=65&selector= vuplus-support.org Forum]
+<br> The '''Vu+ Util''' for serial flash , you can get it from here [https://www.vuplus-support.org/wbb4/filebase/index.php?entry/319-vu-flashtool-2-0-1/= vuplus-support.org Forum]
 *Image saved on the PC (nfi version)