VTi Install: Unterschied zwischen den Versionen

Aus Vu+ WIKI
Wechseln zu: Navigation, Suche
(How to upgrade the Vu+ image via Serial Port)
Zeile 121: Zeile 121:
 
*Unplug the USB Stick from the box
 
*Unplug the USB Stick from the box
 
*Power off the VU+ STB , and restart it again  
 
*Power off the VU+ STB , and restart it again  
 
  
  
Zeile 139: Zeile 138:
 
*Unplug the USB Stick from the box
 
*Unplug the USB Stick from the box
 
*Power off the VU+ STB , and restart it again  
 
*Power off the VU+ STB , and restart it again  
 
  
  
Zeile 157: Zeile 155:
 
*Unplug the USB Stick from the box
 
*Unplug the USB Stick from the box
 
*Power off the VU+ STB , and restart it again
 
*Power off the VU+ STB , and restart it again
 
  
  
Zeile 175: Zeile 172:
 
*If the Standby LED is green, the flashing process is finished, then you can unplug the USB stick from the box
 
*If the Standby LED is green, the flashing process is finished, then you can unplug the USB stick from the box
 
*Power off the VU+ STB , and restart it again
 
*Power off the VU+ STB , and restart it again
 +
  
 
== How to upgrade the Vu+ image via Serial Port ==
 
== How to upgrade the Vu+ image via Serial Port ==

Version vom 8. Mai 2016, 09:17 Uhr


Deutsch.png - VTi Installation English.png - VTi Install

To equip your Vu + box with a different, or new image, you need what we call it "Image". There are 2 versions of images ,the USB one, and serial flash (NFI).

Main Faults:
  • wrong Image downloaded e.g. Vu+ Duo instead of Vu+ Duo²
  • wrong folder structure on USB stick
  • USB stick wrong formated
  • USB stick incompatibel or damaged


How to upgrade the Vu+ Solo4k image via USB

  • Save the image on the PC (USB version)
  • Unzip files
  • Format USB flash drive with the file system FAT, or FAT32
  • Create on the stick Directory /vuplus/solo4k
  • Copy to the stick the 5 files into Directory /vuplus/solo4k
  • Power off VU+ STB
  • Remove all USB devices from the box
  • Plug-in the USB Stick into Vu+ Box
  • Turn on the VU+ STB
  • Wait for "Update! Press Power"
  • Press the button on the front to start the flash procedure
  • Wait for "Finished, Removing USB" message
  • Unplug the USB Stick from the box
  • Power off the VU+ STB , and restart it again


How to upgrade the Vu+ Zero image via USB

  • Save the image on the PC (USB version)
  • Unzip files
  • Format USB flash drive with the file system FAT, or FAT32
  • Create on the stick the Directory /vuplus/zero
  • Copy to the stick the 5 files into the Directory /vuplus/zero
  • Power off VU+ STB
  • Remove all USB devices from the box
  • Plug-in the USB Stick into Vu+ Box
  • Turn on the VU+ STB
  • Firmware Update will start automatically
  • During the flash procedure the LED pulsates
  • If the LED blinks, the flashing process is finished, then you can unplug the USB stick from the box
  • Power off the VU+ STB , and restart it again


How to upgrade the Vu+ Solo SE V1/V2 image via USB

  • Save the image on the PC (USB version)
  • Unzip files
  • Format USB flash drive with the file system FAT, or FAT32
  • Create on the stick the Directory /vuplus/solose
  • Copy to the stick the 3 files into the Directory /vuplus/solose
  • Power off VU+ STB
  • Remove all USB devices from the box
  • Plug-in the USB Stick into Vu+ Box
  • Turn on the VU+ STB
  • Firmware Update will start automatically
  • During the flash procedure the LED pulsates
  • If the LED blinks, the flashing process is finished, then you can unplug the USB stick from the box
  • Power off the VU+ STB , and restart it again


How to upgrade the Vu+ Duo² image via USB

  • Save the image on the PC (USB version)
  • Unzip files
  • Format USB flash drive with the file system FAT, or FAT32
  • Create on the stick Directory /vuplus/duo2
  • Copy to the stick the 5 files into Directory /vuplus/duo2
  • Power off VU+ STB
  • Remove all USB devices from the box
  • Plug-in the USB Stick into Vu+ Box
  • Turn on the VU+ STB
  • Press the button on the front to start the flash procedure
  • Wait for "Finished, Removing USB" message
  • Unplug the USB Stick from the box
  • Power off the VU+ STB , and restart it again


How to upgrade the Vu+ Solo² image via USB

  • Save the image on the PC (USB version)
  • Unzip files
  • Format USB flash drive with the file system FAT, or FAT32
  • Create on the stick Directory /vuplus/solo2
  • Copy to the stick the 5 files into Directory /vuplus/solo2
  • Power off VU+ STB
  • Remove all USB devices from the box
  • Plug-in the USB Stick into Vu+ Box
  • Turn on the VU+ STB
  • wait for "Update please press Power"
  • Tip on the blue Power button at the front to start the flash procedure
  • Wait for "Finished, Removing USB" message
  • Unplug the USB Stick from the box
  • Power off the VU+ STB , and restart it again


How to upgrade the Vu+ Ultimo image via USB

  • Save the image on the PC (USB version)
  • Unzip files
  • Format USB flash drive with the file system FAT,or FAT32
  • Create on the stick : Directory/vuplus/ultimo
  • Copy to the stick the 4 files into :Directory/vuplus/ultimo
  • Power off VU+ STB
  • Remove all USB devices from the box
  • Plug-in the USB Stick into Vu+ Box
  • Turn on the VU+ STB
  • Press the button "-" on front of the Ultimo
  • Wait for "Finished, Removing USB" message
  • Unplug the USB Stick from the box
  • Power off the VU+ STB , and restart it again


How to upgrade the Vu+ Uno image via USB

  • Save the image on the PC (USB version)
  • Unzip files
  • Format USB flash drive with the file system FAT,or FAT32
  • Create on the stick : Directory/vuplus/uno
  • Copy to the stick the 4 files into :Directory/vuplus/uno
  • Power off VU+ STB
  • Remove all USB devices from the box
  • Plug-in the USB Stick into Vu+ Box
  • Turn on the VU+ STB
  • Press the button "-" on front of the Uno
  • Wait for "Finished, Removing USB" message
  • Unplug the USB Stick from the box
  • Power off the VU+ STB , and restart it again


How to upgrade the Vu+ Duo / Vu+ Duo LE image via USB

  • Save the image on the PC (USB version)
  • Unzip files
  • Format USB flash drive with the file system FAT,or FAT32
  • Create on the stick : Directory/vuplus/duo
  • Copy to the stick the 3 files into :Directory/vuplus/duo
  • Power off VU+ STB
  • Remove all USB devices from the box
  • Plug-in the USB Stick into Vu+ Box
  • Turn on the VU+ STB
  • Firmware Update will start automatically
  • Wait for the VFD to display "Finished ... please reboot"
  • Unplug the USB Stick from the box
  • Power off the VU+ STB , and restart it again


How to upgrade the Vu+ Solo image via USB

  • Save the image on the PC (USB version)
  • Unzip files
  • Format USB flash drive with the file system FAT,or FAT32
  • Create on the stick : Directory/vuplus/duo
  • Copy to the stick the 3 files into :Directory/vuplus/duo
  • Power off VU+ STB
  • Remove all USB devices from the box
  • Plug-in the USB Stick into Vu+ Box
  • Turn on the VU+ STB
  • Firmware Update will start automatically
  • The Standby LED will be red and if the USB stick detected ,the LEDs lights up
  • If the Standby LED is green, the flashing process is finished, then you can unplug the USB stick from the box
  • Power off the VU+ STB , and restart it again


How to upgrade the Vu+ image via Serial Port

Sometimes it comes that the box only respond via serial port.Then we need the *. Nfi file and the Vu + Util.
The Vu+ Util for serial flash , you can get it from here vuplus-support.org Forum

  • Image saved on the PC (nfi version)
  • Unzip files
  • Start Vu+ Util

1vuduopdfadobereader.png

  • Select your COM port

2manualforvuutilpdfadob.png

  • Check the DHCP if you do not have any static IP for VU+

3vuplusdhcpon.jpg

  • Then click the Connect button

4manualforvuutilpdfadob.png

  • Now you should see “Serial port open success. Please turn on your box.”, then power on the VU+ and since DHCP is set, click Next button to set IP

5manualforvuutilpdfadob.png

  • Now you see " IP Setup Success" in VU+ Util

6manualforvuutilpdfadob.png

  • Now browse the *. nfi File menu. We recommend, of course, the VTi Image

7manualforvuutilpdfadob.png

  • And then click the Flash button I VU+ Util you will see "Reading file,please wait a moment..."

8manualforvuutilpdfadob.png

  • then it will appear "flashing process is completed"

9manualforvuutilpdfadob.png

  • Now the update is finished. You can click "disconnect" to disconnect and then exit at Exit button, in the VU + Util.Power off the VU+ and then restart the box