323
Bearbeitungen
Änderungen
keine Bearbeitungszusammenfassung
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
*If the Standby LED is green, the flashing process is finished, then you can unplug the USB stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Uno 4k image via USB ==
*Save the image on the PC
*Format USB flash drive with the file system FAT or FAT32
*Extract the downloaded image on the flash drive, the folders on the drive should be vuplus/uno4k
*There should be files in the uno4k folder
*Turn the Vu+ off (in deepstandby or with the power switch)
*Remove all USB devices
*Insert the flash drive in the Vu+
*Turn the Vu+ on
*During the flash process the LED pulsates
*When the flash progress is finished the LED stops pulsating and starts blinking
*Remove the flash drive from the Vu+
*Use the power switch to turn the Vu+ off and back on
*The VTi startwizard should popup, otherwise something went wrong
== How to upgrade the Vu+ image via Serial Port ==
