[[Kategorie:Index EN]] {|width="30%" |[[Bild:deutsch.png]] - [[VTi Installation]] |[[Bild:english.png]] - #WEITERLEITUNG [[VTI Install]] |} [[VTi Install]] To equip your Vu + box with a different, or new image, you need what we call it "Image". There are 2 versions of images ,the USB one, and serial flash (NFI). == How to upgrade the Vu+ Solo4k image via USB == *Save the image on the PC (USB version)*Unzip files*Format USB flash drive with the file system FAT, or FAT32*Create on the stick Directory /vuplus/solo4k*Copy to the stick the 5 files into Directory /vuplus/solo4k*Power off VU+ STB*Remove all USB devices from the box*Plug-in the USB Stick into Vu+ Box*Turn on the VU+ STB*Wait for "Update! Press Power"*Press the button on the front to start the flash procedure*Wait for "Finished, Removing USB" message*Unplug the USB Stick from the box*Power off the VU+ STB , and restart it again == How to upgrade the Vu+ Zero image via USB == *Save the image on the PC (USB version)*Unzip files*Format USB flash drive with the file system FAT, or FAT32*Create on the stick the Directory /vuplus/zero*Copy to the stick the 5 files into the Directory /vuplus/zero*Power off VU+ STB*Remove all USB devices from the box*Plug-in the USB Stick into Vu+ Box*Turn on the VU+ STB*Firmware Update will start automatically*During the flash procedure the LED pulsates*If the LED blinks, the flashing process is finished, then you can unplug the USB stick from the box*Power off the VU+ STB , and restart it again == How to upgrade the Vu+ Solo SE V1/V2 image via USB == *Save the image on the PC (USB version)*Unzip files*Format USB flash drive with the file system FAT, or FAT32*Create on the stick the Directory /vuplus/solose*Copy to the stick the 3 files into the Directory /vuplus/solose*Power off VU+ STB*Remove all USB devices from the box*Plug-in the USB Stick into Vu+ Box*Turn on the VU+ STB*Firmware Update will start automatically*During the flash procedure the LED pulsates*If the LED blinks, the flashing process is finished, then you can unplug the USB stick from the box*Power off the VU+ STB , and restart it again == How to upgrade the Vu+ Duo2 image via USB == *Save the image on the PC (USB version)*Unzip files*Format USB flash drive with the file system FAT, or FAT32*Create on the stick Directory /vuplus/duo2*Copy to the stick the 5 files into Directory /vuplus/duo2*Power off VU+ STB*Remove all USB devices from the box*Plug-in the USB Stick into Vu+ Box*Turn on the VU+ STB*Press the button on the front to start the flash procedure*Wait for "Finished, Removing USB" message*Unplug the USB Stick from the box*Power off the VU+ STB , and restart it again == How to upgrade the Vu+ Solo2 image via USB == *Save the image on the PC (USB version)*Unzip files*Format USB flash drive with the file system FAT, or FAT32*Create on the stick Directory /vuplus/solo2*Copy to the stick the 5 files into Directory /vuplus/solo2*Power off VU+ STB*Remove all USB devices from the box*Plug-in the USB Stick into Vu+ Box*Turn on the VU+ STB*wait for "Update please press Power"*Tip on the blue Power button at the front to start the flash procedure*Wait for "Finished, Removing USB" message*Unplug the USB Stick from the box*Power off the VU+ STB , and restart it again == How to upgrade the Vu+ Ultimo image via USB == *Save the image on the PC (USB version)*Unzip files*Format USB flash drive with the file system FAT,or FAT32*Create on the stick : Directory/vuplus/ultimo*Copy to the stick the 4 files into :Directory/vuplus/ultimo*Power off VU+ STB*Remove all USB devices from the box*Plug-in the USB Stick into Vu+ Box*Turn on the VU+ STB*Press the button "-" on front of the Ultimo *Wait for "Finished, Removing USB" message*Unplug the USB Stick from the box*Power off the VU+ STB , and restart it again == How to upgrade the Vu+ Uno image via USB == *Save the image on the PC (USB version)*Unzip files*Format USB flash drive with the file system FAT,or FAT32*Create on the stick : Directory/vuplus/uno*Copy to the stick the 4 files into :Directory/vuplus/uno*Power off VU+ STB*Remove all USB devices from the box*Plug-in the USB Stick into Vu+ Box*Turn on the VU+ STB*Press the button "-" on front of the Uno *Wait for "Finished, Removing USB" message*Unplug the USB Stick from the box*Power off the VU+ STB , and restart it again == How to upgrade the Vu+ Duo / Vu+ Duo LE image via USB == *Save the image on the PC (USB version)*Unzip files*Format USB flash drive with the file system FAT,or FAT32*Create on the stick : Directory/vuplus/duo*Copy to the stick the 3 files into :Directory/vuplus/duo*Power off VU+ STB*Remove all USB devices from the box*Plug-in the USB Stick into Vu+ Box*Turn on the VU+ STB*Firmware Update will start automatically*Wait for the VFD to display "Finished ... please reboot"*Unplug the USB Stick from the box*Power off the VU+ STB , and restart it again == How to upgrade the Vu+ Solo image via USB == *Save the image on the PC (USB version)*Unzip files*Format USB flash drive with the file system FAT,or FAT32*Create on the stick : Directory/vuplus/duo*Copy to the stick the 3 files into :Directory/vuplus/duo*Power off VU+ STB*Remove all USB devices from the box*Plug-in the USB Stick into Vu+ Box*Turn on the VU+ STB*Firmware Update will start automatically*The Standby LED will be red and if the USB stick detected ,the LEDs lights up*If the Standby LED is green, the flashing process is finished, then you can unplug the USB stick from the box*Power off the VU+ STB , and restart it again == How to upgrade the Vu+ image via Serial Port == Sometimes it comes that the box only respond via serial port.Then we need the *. Nfi file and the Vu + Util.<br> The '''Vu+ Util''' for serial flash , you can get it from here [http://www.vuplus-support.org/wbb2/database.php?action=ddcount&data_url=8754_vu-util_v2.0.1.zip&data_id=1047&ordner=65&selector= vuplus-support.org Forum] *Image saved on the PC (nfi version)*Unzip files*Start Vu+ Util[[Datei:1vuduopdfadobereader.png|500px]] *Select your COM port[[Datei:2manualforvuutilpdfadob.png|500px]] *Check the DHCP if you do not have any static IP for VU+[[Datei:3vuplusdhcpon.jpg|500px]] *Then click the Connect button[[Datei:4manualforvuutilpdfadob.png|500px]] *Now you should see “Serial port open success. Please turn on your box.”, then power on the VU+ and since DHCP is set, click Next button to set IP[[Datei:5manualforvuutilpdfadob.png|500px]] *Now you see " IP Setup Success" in VU+ Util[[Datei:6manualforvuutilpdfadob.png|500px]] *Now browse the *. nfi File menu. We recommend, of course, the VTi Image[[Datei:7manualforvuutilpdfadob.png|500px]] *And then click the Flash button I VU+ Util you will see "Reading file,please wait a moment..."[[Datei:8manualforvuutilpdfadob.png|500px]] *then it will appear "flashing process is completed"[[Datei:9manualforvuutilpdfadob.png|500px]] *Now the update is finished. You can click "disconnect" to disconnect and then exit at Exit button, in the VU + Util.Power off the VU+ and then restart the box
