764
Bearbeitungen
Änderungen
Die Seite wurde neu angelegt: „Kategorie:Index EN {|width="30%" |Bild:deutsch.png - VTi Installation |Bild:english.png - VTI Install |} VTi Install To equip you…“
[[Kategorie:Index EN]]
{|width="30%"
|[[Bild:deutsch.png]] - [[VTi Installation]]
|[[Bild:english.png]] - [[VTI Install]]
|}
[[VTi Install]]
To equip your Vu + box with a different, or new image, you need what we call it "Image". There are 2 versions of images ,the USB one, and serial flash (NFI).
== How to upgrade the Vu+ Solo4k image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT, or FAT32
*Create on the stick Directory /vuplus/solo4k
*Copy to the stick the 5 files into Directory /vuplus/solo4k
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Wait for "Update! Press Power"
*Press the button on the front to start the flash procedure
*Wait for "Finished, Removing USB" message
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Zero image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT, or FAT32
*Create on the stick the Directory /vuplus/zero
*Copy to the stick the 5 files into the Directory /vuplus/zero
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Firmware Update will start automatically
*During the flash procedure the LED pulsates
*If the LED blinks, the flashing process is finished, then you can unplug the USB stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Solo SE V1/V2 image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT, or FAT32
*Create on the stick the Directory /vuplus/solose
*Copy to the stick the 3 files into the Directory /vuplus/solose
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Firmware Update will start automatically
*During the flash procedure the LED pulsates
*If the LED blinks, the flashing process is finished, then you can unplug the USB stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Duo2 image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT, or FAT32
*Create on the stick Directory /vuplus/duo2
*Copy to the stick the 5 files into Directory /vuplus/duo2
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Press the button on the front to start the flash procedure
*Wait for "Finished, Removing USB" message
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Solo2 image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT, or FAT32
*Create on the stick Directory /vuplus/solo2
*Copy to the stick the 5 files into Directory /vuplus/solo2
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*wait for "Update please press Power"
*Tip on the blue Power button at the front to start the flash procedure
*Wait for "Finished, Removing USB" message
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Ultimo image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT,or FAT32
*Create on the stick : Directory/vuplus/ultimo
*Copy to the stick the 4 files into :Directory/vuplus/ultimo
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Press the button "-" on front of the Ultimo
*Wait for "Finished, Removing USB" message
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Uno image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT,or FAT32
*Create on the stick : Directory/vuplus/uno
*Copy to the stick the 4 files into :Directory/vuplus/uno
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Press the button "-" on front of the Uno
*Wait for "Finished, Removing USB" message
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Duo / Vu+ Duo LE image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT,or FAT32
*Create on the stick : Directory/vuplus/duo
*Copy to the stick the 3 files into :Directory/vuplus/duo
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Firmware Update will start automatically
*Wait for the VFD to display "Finished ... please reboot"
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Solo image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT,or FAT32
*Create on the stick : Directory/vuplus/duo
*Copy to the stick the 3 files into :Directory/vuplus/duo
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Firmware Update will start automatically
*The Standby LED will be red and if the USB stick detected ,the LEDs lights up
*If the Standby LED is green, the flashing process is finished, then you can unplug the USB stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ image via Serial Port ==
Sometimes it comes that the box only respond via serial port.Then we need the *. Nfi file and the Vu + Util.
<br> The '''Vu+ Util''' for serial flash , you can get it from here [http://www.vuplus-support.org/wbb2/database.php?action=ddcount&data_url=8754_vu-util_v2.0.1.zip&data_id=1047&ordner=65&selector= vuplus-support.org Forum]
*Image saved on the PC (nfi version)
*Unzip files
*Start Vu+ Util
[[Datei:1vuduopdfadobereader.png|500px]]
*Select your COM port
[[Datei:2manualforvuutilpdfadob.png|500px]]
*Check the DHCP if you do not have any static IP for VU+
[[Datei:3vuplusdhcpon.jpg|500px]]
*Then click the Connect button
[[Datei:4manualforvuutilpdfadob.png|500px]]
*Now you should see “Serial port open success. Please turn on your box.”, then power on the VU+ and since DHCP is set, click Next button to set IP
[[Datei:5manualforvuutilpdfadob.png|500px]]
*Now you see " IP Setup Success" in VU+ Util
[[Datei:6manualforvuutilpdfadob.png|500px]]
*Now browse the *. nfi File menu. We recommend, of course, the VTi Image
[[Datei:7manualforvuutilpdfadob.png|500px]]
*And then click the Flash button I VU+ Util you will see "Reading file,please wait a moment..."
[[Datei:8manualforvuutilpdfadob.png|500px]]
*then it will appear "flashing process is completed"
[[Datei:9manualforvuutilpdfadob.png|500px]]
*Now the update is finished. You can click "disconnect" to disconnect and then exit at Exit button, in the VU + Util.Power off the VU+ and then restart the box
{|width="30%"
|[[Bild:deutsch.png]] - [[VTi Installation]]
|[[Bild:english.png]] - [[VTI Install]]
|}
[[VTi Install]]
To equip your Vu + box with a different, or new image, you need what we call it "Image". There are 2 versions of images ,the USB one, and serial flash (NFI).
== How to upgrade the Vu+ Solo4k image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT, or FAT32
*Create on the stick Directory /vuplus/solo4k
*Copy to the stick the 5 files into Directory /vuplus/solo4k
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Wait for "Update! Press Power"
*Press the button on the front to start the flash procedure
*Wait for "Finished, Removing USB" message
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Zero image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT, or FAT32
*Create on the stick the Directory /vuplus/zero
*Copy to the stick the 5 files into the Directory /vuplus/zero
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Firmware Update will start automatically
*During the flash procedure the LED pulsates
*If the LED blinks, the flashing process is finished, then you can unplug the USB stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Solo SE V1/V2 image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT, or FAT32
*Create on the stick the Directory /vuplus/solose
*Copy to the stick the 3 files into the Directory /vuplus/solose
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Firmware Update will start automatically
*During the flash procedure the LED pulsates
*If the LED blinks, the flashing process is finished, then you can unplug the USB stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Duo2 image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT, or FAT32
*Create on the stick Directory /vuplus/duo2
*Copy to the stick the 5 files into Directory /vuplus/duo2
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Press the button on the front to start the flash procedure
*Wait for "Finished, Removing USB" message
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Solo2 image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT, or FAT32
*Create on the stick Directory /vuplus/solo2
*Copy to the stick the 5 files into Directory /vuplus/solo2
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*wait for "Update please press Power"
*Tip on the blue Power button at the front to start the flash procedure
*Wait for "Finished, Removing USB" message
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Ultimo image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT,or FAT32
*Create on the stick : Directory/vuplus/ultimo
*Copy to the stick the 4 files into :Directory/vuplus/ultimo
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Press the button "-" on front of the Ultimo
*Wait for "Finished, Removing USB" message
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Uno image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT,or FAT32
*Create on the stick : Directory/vuplus/uno
*Copy to the stick the 4 files into :Directory/vuplus/uno
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Press the button "-" on front of the Uno
*Wait for "Finished, Removing USB" message
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Duo / Vu+ Duo LE image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT,or FAT32
*Create on the stick : Directory/vuplus/duo
*Copy to the stick the 3 files into :Directory/vuplus/duo
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Firmware Update will start automatically
*Wait for the VFD to display "Finished ... please reboot"
*Unplug the USB Stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ Solo image via USB ==
*Save the image on the PC (USB version)
*Unzip files
*Format USB flash drive with the file system FAT,or FAT32
*Create on the stick : Directory/vuplus/duo
*Copy to the stick the 3 files into :Directory/vuplus/duo
*Power off VU+ STB
*Remove all USB devices from the box
*Plug-in the USB Stick into Vu+ Box
*Turn on the VU+ STB
*Firmware Update will start automatically
*The Standby LED will be red and if the USB stick detected ,the LEDs lights up
*If the Standby LED is green, the flashing process is finished, then you can unplug the USB stick from the box
*Power off the VU+ STB , and restart it again
== How to upgrade the Vu+ image via Serial Port ==
Sometimes it comes that the box only respond via serial port.Then we need the *. Nfi file and the Vu + Util.
<br> The '''Vu+ Util''' for serial flash , you can get it from here [http://www.vuplus-support.org/wbb2/database.php?action=ddcount&data_url=8754_vu-util_v2.0.1.zip&data_id=1047&ordner=65&selector= vuplus-support.org Forum]
*Image saved on the PC (nfi version)
*Unzip files
*Start Vu+ Util
[[Datei:1vuduopdfadobereader.png|500px]]
*Select your COM port
[[Datei:2manualforvuutilpdfadob.png|500px]]
*Check the DHCP if you do not have any static IP for VU+
[[Datei:3vuplusdhcpon.jpg|500px]]
*Then click the Connect button
[[Datei:4manualforvuutilpdfadob.png|500px]]
*Now you should see “Serial port open success. Please turn on your box.”, then power on the VU+ and since DHCP is set, click Next button to set IP
[[Datei:5manualforvuutilpdfadob.png|500px]]
*Now you see " IP Setup Success" in VU+ Util
[[Datei:6manualforvuutilpdfadob.png|500px]]
*Now browse the *. nfi File menu. We recommend, of course, the VTi Image
[[Datei:7manualforvuutilpdfadob.png|500px]]
*And then click the Flash button I VU+ Util you will see "Reading file,please wait a moment..."
[[Datei:8manualforvuutilpdfadob.png|500px]]
*then it will appear "flashing process is completed"
[[Datei:9manualforvuutilpdfadob.png|500px]]
*Now the update is finished. You can click "disconnect" to disconnect and then exit at Exit button, in the VU + Util.Power off the VU+ and then restart the box